Fractional RF Micro-Needle (MRF)Advanced Anti-Ageing Technology



What is Fractional RF Micro-needle?

Fractional RF Micro-needle is a procedure that involves the penetration of insulated microneedles into the dermis to deliver high-tensioned radiofrequency pulse into the targeted tissue. This results in the body’s own production of elastin and collagen fibres, making skin firmer and healthier.
The Deluxe Skin Micro-Needle Fractional RF System is the ideal technology for skin lifting, tightening and rejuvenation by utilising minimally invasive micro-needles to deliver controlled RF energy directly into various depths of the skin ensuring the RF heat is penetrated much deeper, leaving the top skin layer cool.

Features and Indications

The depth of penetration of the micro-needles can be adjusted from 0.5 to 3.5mm based on treatment target areas, and radiofrequency energy is then released inside of the skin. The RF energy is delivered through the focused tip of the micro-needles, leading to far-less trauma to the surrounding epidermis. This leads to significantly decreased discomfort and down time for the patient compared to conventional fractional lasers. The needle tip contains 25, 49 and 81 very small gold needles acting as an internal conductor.
The combination of microneedles and radiofrequency leads to a more substantial improvement in skin quality and texture. This combination also allows the procedure to treat a variety of concerns such as skin tightening and brightening, pore size reduction and stretch marks. It is also effective in scar treatment such as deep acne scars, ice pick scars, atrophic scars, burn and operation scars.

The Benefits

  • Minimally invasive
  • Shorter procedure time and downtime
  • Lower risks such as post-inflammatory hyperpigmentation and scarring

 

Application

Face Treatment

Body Treatment

Non-surgical Face Lifting
Scars
Wrinkle Reduction
Hyperhidrosis
Skin Tightening
Spider Veins
Skin Rejuvenation (Whitening)
Stretch Marks
Pore Reduction
Acne Scars
Scars

 

Technical Parameters

RF Frequency
5Mhz
RF Output
80W
Work mode
MFR ,SFR
MFR Needle depth
0~3 mm adjustable
MFR Pulse Time
100ms~600ms adjustable
MFR Delay Time
1~10 ms
SFR Pulse Time
1000ms~3000ms adjustable
RF Energy intensity
1~10 level
Invasive head area(cm2)
1*1 , 1.5*1.5 , 2*2
Electrode number
25 pin (5×5) ,49 pin (7×7) ,81 pin (9×9)
Led
650nm / 5mWX1
Non invasive head
36 pin / 2*2 cm2
Input Voltage
110/220V; 50/60Hz


*Results may vary from person to person